Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1698 Over N Over Stencil - CUPCAKES
• 60-7023 7.5 inch Round Plate
• 60-3551 18 oz. Tea Mug
• 60-3570 8 oz. Coffee Mug

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. Plate:
• After preparing the glass, position a cupcake bottom piece in the middle of the plate. Add a frosting centered above it and the word Cupcake bellow. Add sprinkles, if desired, and press down firmly. Follow the etching cream instructions to etch these onto the plate.
2. Coffee Mug:
• After preparing the glass, position a cupcake bottom piece in the middle of the plate. Add a frosting centered above it and the word Sweet bellow. Add sprinkles, if desired, and press down firmly. Follow the etching cream instructions to etch these onto the plate.
3. Tea Mug:
• This design was etched in stages. The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
• After preparing the glass, position the Yummy across the middle of the mug with a small cupcake at the end. Follow the etching cream instructions to etch these onto the mug.
• Looking through the back of the glass, position the cherry as close as possible above the first u in yummy. Add the remaining small cupcakes to the design, as shown. Use the etching cream again to etch these onto the mug.